Tuesday 7 September 2010

Single Sock Dino Tutorial

Thank you to all the people who requested this tutorial, your encouragement made it happen!
So here is my favourite soft hearted beast for your sewing pleasure.

To begin we need to gather supplies:
  • A pair of scissors
  • A sock (This one is a bit thread bare and woolly and needs a new lease on life)
  • Some red (or, really, any colour) felt
  • 2 buttons for eyes
  • Some coloured thread for sewing together and making his face
  • Some filling ( I used standard fibre fill, but even scraps of fabric would do)
Firstly, we need to cut the sock:

In this pattern the heel of the sock becomes his nose/face/muzzle (what is appropriate for a T-Rex?)
The part towards the toe of the sock is going to be the top of his head and the part towards the ankle is his body. The body part is about twice as long as the head part but don't be too worried about measurements etc.
Next we're gonna sew up the sock at the body hole.

To do this I turn the tube with the heel of the sock inside out and then run a longish stitch very simply around the lip of the tube, then gather closed. Once I've gathered I stitch across the opening a few times to seal it securely. Again, this is the part he will sit on so it doesn't have to be perfect.

Turn the sock right way round again and stuff with filling. You want to create the rough shape of the filling in your hands before you stuff it into the sock. This makes less lumpy bits. If you do need to add more filling, try making a space in the middle of the already existing filling and inserting the new in there. Um, like a pie filling :).
Now he's starting to look like something. There are two methods for the next bit.
The hole on the top of his head needs to be closed. You can 1) gather the hole closed like we did the other side or 2) do the slightly more elaborate, but I think neater, finish below.
If you do decide to just gather remember to pull the hole closed slowly and tuck the unfinished ends into the gather as you go (else he'll have a weird lumpy, sticky up bit)
This is the method I use:

Hold the toy facing away from you (to the left of the picture above). Pinch the hole closed so it runs in a line from the nose direction to along his spine. In the middle of this long opening make a stitch or two to hold in shape.

Now stitch about a thumbs width away from this holding stitch like in the picture above, then tuck the remaining edges of the hole back towards were the needle is. (In the picture above his nose is facing left and his bum is facing right) Stitch along these two new joins to close this end of the hole.

Repeat on the other side. There's no photo of this but to create his chin you need to sew a running stitch along his front, just underneath the heel of the sock, and from about ear to ear (If he had any!). (Kinda eye where you'd like the fold of his chin to be). Pull on this running stitch to gather it. The photo below shows how the sock dents under his chin but is smooth up his spine to the top of his head

You can also see in this picture how the hole that was at the top of the sock is towards his crown.
Next we need to cut the remaining sock bits to make his arms (sorry, claws) and his tail. The small bits to the left are cut from the leftover sock towards the shin and are folded double. ( the larger bit on top of the left group is just to show the ribbed elastic top of the sock and is not used). The group to the right is the original toe of the sock. I have cut from about the middle of the opening and gently curved the cut to make a pointy tail. The piece on the very right hand side will not be used.

Turn the tail and the arm pieces inside out and stitch into tubes with one closed end. Turn right way around and stuff gently.

Attach the arms and the tail to the body, tucking in the unfinished ends as you go.

Next we cut the felt for the scales. A word on cutting the scales- if you're gonna make more than one of these begin by cutting a rectangle of fleece and cutting the diagonals down the centre of this rectangle, never quite touching the outside edge of the rectangle. That way you get two scale pieces instead of one and a whole lot of useless triangles.

Sew the scales to the dinosaur. You can see how I sew on the scales in this photo.

He should look something like this handsome boy at this stage.

Next we attach his eyes- I liked traditional beady eyes but bigger crazy ones would be cute too.

Finally his face! I just free hand embroider a big toothy grin and some french knot nostrils on mine. If you'd like a bit more symmetry (which mine are seriously lacking!) then use some dress makers chalk, or wash away fabric pen to sketch on a mouth. If you don't know how to make a french knot, the internest will teach you or just sew two little crosses or circles etc.

That's it! Congratulations you've just made the world a more dangerous and cuddly place!
(P.S. Don't feel like sewing? Click here to buy them in the Little Black Teapot Shop )

Featured on

6 comments:

  1. Well done! I bet my son would so that with me. Thanks for sharing .... I've posted a link.

    ReplyDelete
  2. Wow buth how hard is it

    ReplyDelete
  3. It's easy! be brave and just go for it! It's the most amazing fun and this uper soft toy is wonderful to cuddel when you're done :)

    ReplyDelete
  4. bellissimo!!!!!!!!!!

    ReplyDelete
  5. great to bring my niece's imaginary pet dinosaur to life

    ReplyDelete
  6. It is so fun and really easy thank you

    ReplyDelete

Make me famous!